Aimpoint Micro

AR-15 Stock –

first off this product is a great idea IMO. the quaility is top notch but… i have the leo mount and i cant get far enough down for my bead sight. i dont want to put something taller on there since i prefer the factory bead on the 870 i put this on. anyone else having this problem? i was hoping for a similar cheek weld to the factory stock. i absolutely love this piece except for using the front bead…and being comfortable with my sights is the most important thing to me here. Gungho_1989 5/21/2008 9:40:19 AM With the Low tube and the LEO some people cannot get a normal sight picture. I am one of those people who like you felt I couldn’t get all the way down to where I needed to be. What I ended up doing was installing a set of Trijicon ghost rings on the shotgun. I know this is not what you want to do but it was the only thing that worked for me. I have a friend who is very proficient with a shotgun and her recently purchased a LEO stock set off us and still uses his bead and does pretty dang good with it. when we were out at the range the first time we took it out he commented on it and started shooting. My guess is he holds off the target just a little different, knightvision 5/21/2008 12:56:34 PM thanks for the reply. i wish i would have known this prior. i actually had some wilson combat ghost rings i bought and then decided i wanted to leave just the bead sight. i sold the ghost rings NIB. i can get down enough to use the bead but i have to fight it and it takes too much time to get on target. i also use this shotgun for skeet shooting so the extra time needed is out of the question. ive had the Mesa Tactical adapter on there awhile and taken the 870 out numerous times just to keep trying it because it is such a well made piece. i am trying to make myself love it and just can get to that point. i am so hesitant to sell this piece but i need the right sight picture. Branspop 5/21/2008 10:29:08 PM What about these? Would they sit high enough?

r
Email User
Reply
Quote
Report
pappy177
Bronze Contributor

Joined: Jul 2011
FL,

Posts: 1183
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (3)
Posted: 10/6/2011 9:29:53 AM EST
I don’t think slam fires are a problem on properly maintained SKS Rifle Stocks rifles otherwise everyone would be selling springs for them.

–

512 eotech –
AR-15 Stock

AK 47 Scope Mount –

Bronze Contributor

Joined: Jul 2007
WA,
bla bla bla

Posts: 2889
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (130)
Posted: 10/23/2011 6:23:36 PM EST
[Last Edit: 10/23/2011 6:24:21 PM EST by monstercat79]
never seen one. as far as I know there is no factory threaded barrels.
User Info
IM User
Email User
Reply
Quote
Report
B44T

Joined: Jun 2006
WA,
Offline
Posts: 2773
Link To This Post
EE Feedback 100% (11)
Posted: 10/23/2011 10:02:13 PM EST
There were but not many compared to the number of pressed and pinned guns.
User Info
IM User
Email User
Reply
Quote
Report
EAB1911

Joined: Jul 2004
GA,
Offline
Posts: 728
Link To This Post
EE Feedback 100% (38)
Posted: 10/25/2011 2:41:57 PM EST
Go to www.sksboards.com and start posting, and looking there. You can also post a WTB ad, but you may have to make a small donation to the site. That sorta makes you a of the site and lets you see the all of the classifieds and post in the classifieds as well.
Was at a local shop and saw a Glnic imports SKS Rifle Stocks marked “CGA made in China” . It is in excellent condition, all matching, machined trigger group, screw in barrel, and spike bayo. They want $295.00. Never heard of this importer or manufacturer. Is this a good gun?
User Info
IM User
Email User
Reply
Quote
Report
DanTSX
Bronze Contributor

Joined: Oct 2008
CT,
on a Rhodetrip

Posts: 11247

–

Jul 2005
NJ,
Offline
Posts: 2505
Link To This Post
EE Feedback 100% (6)
Posted: 10/6/2011 3:22:07 PM EST
Dont bother make sure the pin channel and bolt is clean shoot away
User Info

Joined: Oct 2008
CT,
Offline
Posts: 988
Link To This Post
EE Feedback 0% (0)
Posted: 10/6/2011 11:30:23 PM EST
Make sure you take the entire bolt apart once and awhile and actually clean out the channel and check for rust. Assuming you do that and don’t regularly shoot corrosive ammo through it without totally cleaning it out… you’ll be fine.

Just re what can happen when you drop the bolt on any gun and have it pointed downrange or into the dirt.

I’ve installed murray’s pins…Seems like a good idea but still won’t prevent it from happening if the the bolt gets filled with rust.

Joined: Oct 2002
OH,
Offline
Posts: 645
Link To This Post
EE Feedback 0% (0)
Posted: 10/6/2011 11:45:02 PM EST
IMO and experience no mod is necessary. Proper and regular maintenance is all that is required. It has been my experience that SKS`s that were recently packed in grease were the worst culprit for slam fires. Here is where a complete bolt disassembly can help along with a good soaking in gasoline or kerosene and a rubdown with good ol` Dawn dish soap. Then rinse thoroghly, wipe dry, and immediately apply some Break Free CLP or any other higher grade gun oil. Happy Shots
User Info
IM User
Email User
Reply
Quote
Report
gaweidert
Gold Contributor

Joined: Dec 2004
NY,

Offline
Posts: 3859
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/8/2011 8:57:22 AM EST
The Murray firing pin actually looks a lot like the original SKS Rifle Stocks firing pin design.

–

A man suspected of using his connections with two Valley churches to molest young children has been arrested, according to the Phoenix

MWG 90 Rounder AR-15 Magazine, AR-15, Tactical Gear, Shooting …
Take your shooting to the next level with this high capacity magazine. The enclosed MWG 90 Rounder for the AR-15/M16 boasts

Delhi Traffic
The initiative, which was launched on Jan. 1 as part of Road Safety Week, received a “huge response,” said Satyendra Garg, joint commissioner of Delhi’s traffic

MWG Rain Breaker Denim Jean, Men’s Traditional Jeans, Men’s Jeans …
These jeans never stop working because of bad weather. They’re made of tough, 12-1/2-oz. denim and feature a breathable, water-repellent Rain Break finish that …

MEXICO CITY (Reuters) –

Gurmeet Singh, 40, of Queens was hit with charges including rape, robbery and sex abuse in the alleged May 6, 2011, attack on a 26-year-old passenger in the back of a yellow cab in Williamsburg. A yellow cab driver was arrested for raping a …

Kandahar
The

elcan specterdr –

The Surefire X300 is a great light! However, on an AR, I find the M600C scout more user-friendly. Both are VERY durable, exceptionally made, and will throw out useful light easily to 75 yards with the naked eye, or out to 100+ if you have a good optic with a large exit pupil dia. like an ACOG. Surefire warrenty is the best out there. I bought an old M600A with the old-style tail cap before surefire revised them to eliminate a sticking problem (one of the few complaints about SF was their clicky from a year or 2 back). I called them, told them what I had, and they promptly shipped me not one, but TWO Z68 tail-caps ($40MSRP a piece). Within 1 week of my phone-call I had them. txgp17 2/19/2009 1:53:49 PM I have a Surefire X300 and it kicks ass.

AR 15 gas block –

This thread is in no way intended to bash Trijicon. I am just wondering if any other Accupoint owners have experienced this problem or did I just get lucky? I just initiated contact with Trijicon today about the problem and hope to hear back from them soon. With that being said here is what I managed to do with said scope, and some 175grn 7.62×51 FGMM, and some 168grn .308 FGMM!! These are my best groups yet. I am a bit of a newbie you will have to forgive my excitement lol Both photos are of the same target center bullseye is 168grn 308 above it is the 175grn 7.62×51 Chrome308 Apr 2011 USA TX, USA 34 : 0-0-0 : 5/25/2011 10:28:26 great groups. I don’t know if eyepiece slippage is normal or not, but a piece of tape should fix it Market_Garden Bronze Contributor Team Mar 2009 USA WA, USA 1926 : 0-0-0 : 5/25/2011 11:18:27 : 5/25/2011 11:21:55 by Market_Garden] I do recall hearing about this exact same issue on another TR24, hopefully the guy who had it happen will see this thread and respond. After having issues (huge water leak) with my TR24 and dealing with Trijicon‘s shitty service I sold it. EDIT: This thread has some info, the first post on page 2 mentions it. http://www.ar15.com/forums/topic.html?b=3&f=18&t=535237&page=1 CJan_NH Blissfully ignorant Colt KoolAid drinker… Bronze Contributor Team Jul 2003 USA NH, USA 10323 : 0-0-0 : 5/25/2011 11:24:01 : 5/26/2011 2:11:27 T by CJan_NH] Originally By Chrome308: great groups. I don’t know if eyepiece slippage is normal or not, but a piece of tape should fix it When I dialed in my new TR24 recently I noticed that the focus ring moved fairly easily. Mine doesn’t move easily enough to be considered “loose”, but it certainly moved with less friction than I was expecting. Once I installed a set of Butler Creek flip-up caps the low friction issue went away.

Yep

Posted Via AR15.Com Mobile
gearjammer351
8/4/2011 4:46:08 PM
patriot73:Hello All, Fast question here … Will the LaRue Tactical Pivot Scope Mount fit the Burris 3x Magnifier??? Thanks In Advance, Take Good Care, and Be Safe Always,

-RAVENEDGE-
socommatthews
9/19/2009 8:48:16 PM
Taggin cause I plan to get one. I looks like it will but I dont know for fact.
gunmetalgray [Member]
9/19/2009 8:49:24 PM
Looks like their both 30 mm

http://www.burrisoptics.com/artripler.html

–

Hearing Protection –

I never fired mine and I had paint chipping off around the barrel so I took it back to my dealer and the traded me for a 870P that has a much better finsh. I do think that the asking price of the Desert Recon is way to much…For less money you can get into a Express Tactical. They both have a rather weak finish IMO but the black will not show the wear as bad as the olive finsh. LoadedDrum 3/8/2009 8:43:56 AM I do not own one but I shot one and it was easily the softest shooting pump I have ever tried. I actually prefer it to my 870P with a Knox stock so much so that I am switching to a Speedfeed IV-S with the Limbsaver pad (same as the R3 pad on the Tac Desert Recon). onekneedown 3/8/2009 12:27:04 PM Here’s a pic that I found that shows the same problem I had…I have several sets of brand new take off stocks from Remington 870 Accessories 12ga. Police Shotguns.They are black synthetic,include the stock screw,and have the new Remington R3 Limbsaver butt stock. The price is 50.00 shipped to the con.48 via Priority Mail. 762minigun2 2/12/2010 6:13:18 PM Could you please post a pic of said stock sets? cheby39 2/13/2010 8:49:07 AM http://feed2.tinypic.com/rss.php?ua=XvDNglrZeCAzVq3lPJk0CQ%3D%3D[/img] Copy and paste,sorry for the problem. cheby39 2/13/2010 8:54:06 AM http://tinypic.com/a/1m2qf/2[/img] Copy and paste,sorry for the problem. Snookman24 2/13/2010 6:51:47 PM Is it stock and FOREND? or just the stock? Title and description are a tad different? Thanks cheby39 2/13/2010 10:57:56 PM It is for both stock and forend with the butt stock screw and R3 butt pad and the screws for the butt pad.